close

November 2021

Home

Benefits of Regular Eavestrough Cleaning

Our clients are informed on a regular basis about the need of scheduling regular roof inspections and repairs. This maintenance should involve eavestrough repair on a regular basis to keep them open and ready for drainage.

Keeping your gutters clean and free of debris is essential for the health and durability of your roofing system. Gutter cleaning should be done at least twice a year, and one of the best times to do it is during the winter. Here are some of the issues that may be prevented by doing routine eavestrough maintenance.

Rot

Because your gutters are meant to transport water away from your house, when they become blocked, the water does not flow and pools instead. Because rot in this region is difficult to detect, this condition is especially detrimental to the fascia, which is generally composed of wood. This standing water can gradually damage any additional timber roofing components you have on your property, including trusses and decking on the inside. Without a complete roof replacement and structural redesign, this sagging problem is exceedingly impossible to fix. This damage is not only unpleasant and visible from the outside, but it will also cost you a significant amount of money in roof repairs.

Mold

Mold growth is another hazard caused by standing and leaking water. This is a major issue for your roofing system, as well as a significant health danger for your family. When dripping water penetrates your roofing structure and cannot dry, mold develops. Mold will easily spread and take over your property if you do not keep water out and away from the structure of your home.

Leaks

When water pools near your roofing system because it can’t drain correctly down your gutters, leaks occur. Your blocked downspouts will begin to leak as a result of the standing and pooling water. Water will seep down the side of your property and toward your foundation if your eavestroughs are pushed away from the fascia and the side of your property.

Faults

The escaping water will seep down the side of your walls and pool at the foundation level if you do not have cleaned eavestroughs. This will weaken the structural integrity of your home’s foundation over time, causing microscopic cracks to form. Consider fissures as entryways into your house, which means water will seep into your basement and cause havoc on your interior walls and floors.

read more
Home

Tips for selecting a home builder and working with one

Introduction

Home construction or building is a huge investment. When you settle for the best contractor, you will have a great and happy experience. If you research and read reviews, I’m sure that you have come across many horror stories of builders who messed up everything. What you should understand is that your choice will always matter. There are many professional home builders out there to choose from these days. When making your choice, you should take your time, check their past designs and work and have a one on one talk with them. There is no room for mistakes when it comes to choosing home builders. Here are some important tips for you

  • Choose an experienced builder

The first important thing to do while choosing a home builder is to make sure that the builder is experienced enough. The experience of a home builder will always speak volumes about how efficient the builder is. If Kopper Creek homes builder has been in the market for some time and he has been performing very well, be assured that such a home builder offers quality services to clients. An experienced home builder has sufficient knowledge about building. The builder will therefore guide you on the material to buy and the best thing for you. At the end of the day, you will be sure that the experienced home builder will build quality homes for you and your family.

  • Assess your needs

Just because a home builder is experienced and has positive reviews means that they are the right one for you. Instead of getting right away to picking Kopper Creek homes builder, you must assess your needs first. That simply means that you should set goals before you even start your search for a home builder. Different home builders may offer different scales, building styles, and scales in different projects. There are also builders with a variety of styles to offer. It is very important to search around and make sure that you are settling for a builder who is capable of meeting all your needs.

  • Testimonies

If you are settling for an experienced Kopper Creek homes builder, there must be something that the past clients have to say. Read the testimonies just to be sure of what you are getting into.

Conclusion

The above-mentioned pointers are very important because they will help you choose the most suitable home builder to meet your needs. Always make sure that you are settling for a reliable and reputable contractor. Above all, make sure that they are licensed.

read more
Home

5 REASONS WHY YOUR DRYER IS NOT HEATING OR DRYING CLOTHES

Your dryer is one of the most used appliances in your home, and it can be frustrating and inconvenient when it stops working all of a sudden. It is hard to imagine the inconvenience of a broken appliance until it happens and throws your routine for a loop. Wearing warm clothes straight from the dryer is such a warm feeling, but you cant experience it f your dryer is not heating. Here are some possibilities why your dryer may not be heating or drying your clothes.

Limited power or gas supply

The power supply is one of the first things to examine if your dryer is not heating or working. Most electric dryers require a 240volt electricity supply. If using a gas dryer, ensure it is connected to the gas supply and open the valve. If using an electric one, ensure the dryer is plugged into the power supply. At times the power cord may have been knocked out of place by a pet or kid. If that is okay, check the circuit breaker panel and ensure that the breakers for powering the drier are on.

A dirty lint screen

A dirty lint screen is more likely to cause problems which is why you should clean it after every load. It is found in the door opening or at the top of the dryer. You should pull it out and wipe away the lint with your finger. But if there are detergent stains or residue on the lint screen, you need to clean it with hot water, liquid soap, and a nylon brush. Thankfully there are several online guides on how to clean the lint screen on your dryer.

A dirty vent

Failure to clean the vent in your dryers eventually causes problems in the long run and can even cause a harmful risk such as a fire. Keep in mind that the vent should be cleaned at least once every year to eliminate all the lint and other clogged dirt. However, cleaning a dryer vent can be cumbersome, especially if you don’t know how to do it. Plus, an improperly cleaned vent can impact the dyer’s functioning. You can utilize a professional dryer vent cleaning Los Angeles. That way, you can be assured of the functionality of your dryer.

A blown thermal fuse

Another common possibility why your dryer may not be heating is due to a blown thermal fuse. The thermal fuse in the dryer is designed for safety reasons. When your dryer overheats, the thermal fuse blows, which means that the dryer will not run. To check if the thermal fuse is okay, you can remove it from the panel and test it for continuity or have a professional do it. You can repair it or replace it.

The door is not well latched.

If your dryer is not heating, drying, or starting, there may be a damaged dryer switch. The dryer starts tumbling if the switch is not fully latched or fails to start. Thankfully the dryer switch is an easily replaceable part.

the takeaway

Keep your dryer vent and lint screen clean at all times to ensure a well-functioning dryer.

read more
Home

Boiler Maintenance Checklist

The boiler in your home is responsible for heating water and supplying hot water to the radiators in order to heat each room. How Do You Know When Your Boiler Needs To Be Replaced Sooner Rather Than Later? There are several parts of the boiler which need regular maintenance; if boiler repair is not performed on a yearly basis, these parts may fail prematurely or require additional repairs in the near future. The boiler maintenance checklist below will give you an idea of commercial boiler repair that should be performed on a yearly basis.

1. Check boiler thermostat

A boiler thermostat is a control mechanism for the boiler. The boiler thermostat is responsible for turning the boiler on and off as necessary to maintain the room’s temperature at its set point. Other factors such as humidity, home insulation and weather can affect boiler performance. Before you complete boiler repair, check the boiler thermostat and make boiler operation at least 80% efficient.

2. Inspect boiler pressure gauge

The boiler pressure gauge is connected to boiler steam boiler and water boiler in order to monitor boiler performance and determine if there are any leaks or other damage that needs additional boiler repair. You should inspect this part of the boiler annually by looking for corrosion or boiler leaks. In the event that the boiler pressure gauge is blocked, the boiler won’t have enough water to generate steam and it will need immediate boiler repair.

3. Inspect boiler flue

Boiler flue is a passage for boiler waste heat along the boiler casing wall. This part of the boiler needs regular boiler repair in order to ensure boiler leaks are not emitting boiler waste gases. Some boiler flue problems include boiler blockage, boiler corrosion or boiler leakage. In order to eliminate boiler air pollution and reduce the risk of carbon monoxide poisoning, you should inspect boiler flue regularly for any sign of damage.

4. Inspect pump impeller

Boiler pump is responsible for circulating boiler water through the boiler to the boiler radiators. This part of the boiler needs regular boiler repair in order to ensure boiler performance remains efficient. When you complete a boiler maintenance checklist, an inspection of the pump impeller should be ironed out as it can have serious consequences if not inspected annually for corrosion or leaks.

5. Inspect boiler drain valve

Before boiler repair is complete, boiler drain valves should be examined for boiler blockage. If the boiler drain valve is not accessible, it may need to be replaced with a new boiler drain valve before boiler repair can be completed.

6. Check for loose or damaged faucets and pipes

You should check all boiler boiler faucets and boiler boiler pipes for loose or damaged parts. These issues may require boiler repair in the near future if boiler repair is not completed immediately. You should tighten all boiler parts that are loose; boiler repair for any parts that are broken or damaged should be taken care of immediately by a boiler technician to prevent further problems with boiler performance or boiler water boiler.

read more
Home

5 Curb Appeal Improvements Guaranteed to Increase Property’s Value

When selling a property, you will always want to make the best deal. There are some modifications that you can do, in order to increase the curb appeal at your home and your property’s value at the same time. This way, windows and doors will not be the only thing the buyers notice when they first walk through your door.

1) Entry Doors

Hiring a contractor for this job allows for those with less experience to still successfully replace those windows and doors without worrying about mistakes that may cost them more money later on such as having an improperly installed window or door that doesn’t open or close properly.

2) Patio Doors

One way to cause a good first impression to possible buyers is to make your living area brighter. That can be done by installing patio doors. They bring your home to the next level.

3) Replacement Windows

With so many windows available on the market today, you can easily find a style that completely matches your home decor. Also, the numerous options enable you to pick one style which the functionalities will fit your needs as well.

4) Walkways and Driveway

The walkways to your house entrance and the driveway also add curb appeal to your home’s value. You can have a contractor pave a new driveway or apply a fresh coat of paint onto the existing one. Use mulch around trees in order to create a natural design with a touch of color added. Planting colorful flowers in pots will also add an accent color to your walkway leading up to the front door, making it more appealing than just plain concrete or wood boards.

5) Remodeling the Bathroom

The bathroom is a great room to remodel where there is a lot of space which means a lot of changes can be made here. The bathroom is one of the rooms that buyers spend a lot of time in and if there is an ugly-looking bathroom, it can take away from the value of your home. For example, those who have tile work done in the shower may want to consider having it replaced with glass block windows instead which will give your bathroom a more open and airier feel.

Conclusion:

Overall, there are many possible renovations to make your home look better from a selling perspective. Windows and doors are important factors in selling a house because they add value to the home’s worth. When thinking about replacing them, it is also wise to think about remodeling other rooms or parts of your home that can increase the overall value of the property.

read more